додому Home & Renovation Tools & Materials Best metal bits: Cobalt Drill Bits and Titanium Drill Bits DIY

Best metal bits: Cobalt Drill Bits and Titanium Drill Bits DIY

Most homeowners don’t drill into steel every Tuesday. But if you need to install a sturdy shelf, repair garage door tracks, or tackle a metal fabrication project, a traditional drill just won’t cut it. I need something harder. Something expensive.

The market is full of options. Most of them are tricks. However, there are actually two materials that can withstand the heat and friction of cutting metal: cobalt and titanium.

Choosing the wrong drill bit can cause the tip to break. Waste of money. It strips bolts. Here’s detailed information on how to choose the right tools for the job and which tools to avoid.

Titanium coated drill bit: Hard but Not Sharpenable

Titanium drill bits are not solid titanium. These are high speed steel (HSS) drill bits coated with black titanium oxide. This coating makes them harder and more corrosion resistant than standard steel drill bits.

They last longer. They handle sheet metal well. They are typically harder on surfaces than cobalt drill bits.

But there’s a problem. Since the titanium is only a coating, you cannot sharpen these bits after they are worn. If the cutting blade becomes dull, the bit is trash. You also have to be careful. High friction can heat the coating off. If you use too much force, you ruin the benefit of the coating.

Cobalt drill bit: The Heavy-Duty Choice

Cobalt drill bits are made from cobalt high-speed steel. This is a solid alloy and has no surface treatment. These are ideal for drilling hardened steel, cast iron, titanium and other abrasive materials.

Heat treated. Durable. Can be sharpened repeatedly. This makes it more economical over time when doing heavy lifting.

However, they are brittle. Do not start at high speed. If you cut too fast, the cobalt drill bit may break. Start slowly. Use constant pressure. Let the bit cut; Don’t force it.

How to identify and choose metal drill bits

Not all bits marked as “metal” are created equal. Consider certain features when shopping for the best metal drill bits.

Material Matters
Real metal drill bits are made of tungsten carbide, cobalt or titanium coated steel. Check the packaging. If the material is not specified, assume it’s cheap steel.

Visual cues
Metal drill bits are often black due to the oxide coating. They also have a wide-angle tip (typically 135 degrees) compared to 118 degrees for wood drill bits. This wide angle prevents walking and improves grip on metal surfaces.

Carbide and coating
For the most difficult jobs, you should consider a carbide drill. It has superior durability and high temperature resistance compared to high speed steel. Look for titanium nitride coated drill bits. This gold coating reduces friction and heat generation. Extends the life of the drill bit and enables smoother and faster drilling.

Length and Stability
Jobber length bits are versatile. They fit most standard drills and offers a good balance of reach and stiffness. When it comes to thick steel, stability is everything. A drill press offer the power and stability required by hard metals. Hand-held drills can wobble, break bits, and create uneven holes. If you want to drill several holes in steel, borrow or buy a drill press.

Can a metal drill be used for wood?

Yes, but it’s not ideal. Most metal drill bits increase the splintering and tear-out of the wood. Aggressive tips cut the fibers instead of cutting them clean.

Titanium drill bits are an exception. The coating reduces friction and is sometimes applied to wood. However, for clean wood, use a spade or brad-point bit. Save the metal drill bits for steel.

Frequently asked questions

What are the best drill bits for metal?
Conventional drill bits cannot cut steel. You need a durable option. Cobalt and titanium drill bits are the standard. Cobalt is suitable for sharpening and hard steel. Although titanium has a hard surface, it cannot be reshaped.

How do I know if the drill bit is suitable for metal?
Check the materials list. Look for cobalt, tungsten carbide or titanium oxide. Check the angles of the points. The wide sharp tip represents a metal drill bit. Standard wood drill bits have a central spur and a wide, non-aggressive tip.

Which is harder, cobalt or titanium?
Titanium-coated drill bits have a harder surface. However, cobalt drill bits are tougher overall because they are a solid alloy. It can withstand heat and can be maintained. Titanium drill bits are hard, but can become brittle if the coating wears away.

Why do metal drill bits break?
High speed. Metal drill bits, especially cobalt, can break if spin them too fast. Heat builds up. The metal becomes softer. The bit snaps. Always start slowly. Use cutting fluid when drilling deep holes. Cool the drill bit and lubricates the cut.

You don’t have to use the most expensive bit for every project. However, you need a drill suitable for the material. Steel eats soft bits alive. Don’t let it.

Choose Cobalt for heavy, repetitive tasks. Choose titanium for light work or when sharpening is not possible. Keep your speeds low. Beware of heat. Wear safety glasses of safety, Steel shards fly faster and farther than you think.

The work is done when the hole is clean, not when the drill has stopped.

Exit mobile version